One of the most vital parts of our home would be the roof, and that is all for a very good reason. Besides protecting us from the weather, it would also keep our hard-earned valuables safe and sound. That said, one of the most durable forms of roof would have to be those made from metal.
But just because they are durable does not mean that they do not require maintenance.
Yes, even metal roofs need their own maintenance and care, and the tips below will help you achieve that.
1. Start with a Roof Inspection
Just like how you take care of your body, you should also take care of your home. And the first step towards that goal would be to perform a routine inspection. This is done by checking out the structural integrity of the roof.
This would involve looking for any leaks, checking the joints and vents, and even inspecting the chimney or skylights, if any. These air ducts and vents would also need to be secured in these areas.
The location of the leaks should be documented and noted for later use.
Aside from these leaks, you should also inspect the shingles for any damage. This includes visual inspection and also tapping the shingles to check for any hollow sounds that might indicate a problem.
If you come across any, then you should immediately have them repaired. This can be done by the homeowner.
2. Wash and Clean the Roof
It may seem like a lot of work, but it is very important to have your roof washed and cleaned. This will remove any dirt and grime that could be potentially harmful and promote better airflow.
3. Check the Gutters
Since gutter maintenance is also part of house maintenance, it is also a good idea to check the gutters. The gutters are normally made of metal, but they are still prone to wear and tear.
Checking the gutters involves checking the water channels and fitter and making sure that the gutter is all in one piece. If they are not, then they need to be fixed immediately.
4. Trim Your Tree Branches
The tree branches are another cause of a leafy mess on your roof. While you cannot take away the branches, you can trim them and make sure that they are not too high. If they are, then you need to see to it that the tree is trimmed down to a reasonable height.
The branches should be trimmed to a level where they do not protrude over the roof.
5. Touch Up Any Damaged Paint
It is very common for the paint of the roof to wear out. This happens naturally, no matter how much maintenance it receives.
If this is the case, then you need to touch up the damaged paint. You do not want to just leave it in its current state since it might attract weathering and other problems.
However, if the damaged paint is extensive and will require extensive work, then you may want to consider getting a new roof. Youngstown Roofing Company suggests letting your roof rust until it is completely worn out.
6. Replace Busted Flashings
Flashings are not just the metal at the point of contact with the wall, but it is also the metal that connects the gutters with the roof or the gutters to the chimney. The flashings would also serve as reinforcements to the joints. So inspect all flashings, and where they are damaged, then you need to replace them with new ones.
Conclusion
Going through these simple steps would ensure that your home gets the protection it needs. Metal roofs can last for decades, so it is not surprising that homeowners would want to maintain them.
Remember to apply our pointers above from time to time so that your roof may last for a decade or more.
With all of that being said, if you are looking for metal roofers in Saskatoon, look no further than our expertise here at Wilderness Roofing. We supply and install 5″ seamless eavestroughs and Soffit and Fascia, blown insulation, vinyl, and Hardie Siding, interior and exterior painting, among other things. Call us today for more information about our roof materials and roofing services.